| 3239211 | |
| Manometerbereik |
0 - 400 bar |
| Gewicht (kg) | 1.960 |
| capaciteit cilinder (cm³) |
400/500 |
| Lengte cilinder (mm) |
300 |
| Diameter extern cilinder (mm) |
58 |
| Vullen met vetcartouche 400 gr DIN 1284 |
JA |
| Vullen met vulpomp |
JA / 500 gr |
| Min./Max temperatuur (°C) |
10 / 40 |
| Werkdruk [bar] |
300 |
| Maximum druk [bar] | 400 |
| geleverde hoeveelheid per slag (cm³) |
0.3 |
| Koppeling (smeermiddel) Binnendraad P |
G 1/8 " |
| Koppeling (blaasmond)
Binnendraad E |
M8 X 1 |
| Koppeling manometer Binnendraad M |
G 1/4 " |
| specificatie smeermiddel | NLGI 3/Max 5000 mPa.S |
High Pressure One-hand pump with >Gauge is used for clamping tools and face milling gutters
More
and more face milling cutters and declamping tools are hydraulically
clamped.
An
implemented pressroom in the tool is put under pressure through grease
or oil,
so that the tool as example is pressed onto the shaft of the machine.
|
This
kind of tension enables transferring high torque |
 |
Important Information
The
temperature has a high influence on setting the pressure to the
clamping unit
and on the choice of the high pressure one-hand pump.
If
the temperature falls, pressure also drops, and vice versa. Differences
in temperature of more than 30°C
will most probably require a further setting of the pressure to the
clamping unit. Regular controls have to be done.
Character features of High Pressure One-hand Pump:
- Ergonomic plastic handle for comfortable and simple handling
- Controlled and accurate application, due to check valve, air bleed valve and pressure release valve
- Generates high clamping force without ancillary power
- Easy and clean disconnection of nipple due to pressure release valve and lubricant return flow to the cylinder
- The pressure gauge serves as control tool for clamping or precise controlled pressure build-up for tool chucks
